YGM High-pressure Suspension Mill

Quick Details

Feeding size:
less than 30mm

Capacity:
0.5-20tph

Applications:Limestone, calcite, barite, dolomite, potassium feldspar, bentonite, medical stone, rock phosphate, manganese ore, iron ore, quartz, active carbon, carbon black, ceramic, coal, etc..

Overview Working Principle | Parameter | Inquiry

YGM high-pressure suspension roller mill Overview:

The YGM high-pressure suspension roller mill is similar to the Raymond mill, but the grinding device is equipped with high-pressure springs with a pressure of 1000-1500 kgs. When working, under the action of high-pressure springs and centrifugal force, the grinding roller rolls close to the grinding ring and the rolling pressure is 1.2 times higher Raymond mill under the same conditions, and the capacity can be increased by 20%-30%. It can be used in mining, building materials, chemical industry, metallurgy and other industries. It is suitable for processing and grinding more than 400 kinds of non-flammable and explosive materials with Mohs hardness less than 9.3 and humidity below 6%, such as quartz, feldspar, barite, fluorite, dolomite, garnet, silicon carbide, bauxite, zircon sand, marble, calcite, iron ore, phosphate rock, coal, ceramics, slag, etc. The particle size of the finished product can be adjusted between 30-425 mesh.

YGM High-pressure Suspension Mill Features:

1. Size of final product can be 0.613mm (30mesh) –0.033mm (425mesh). Some can reach the fineness of 0.013mm (1000 mesh). 2. Compared with other mills its capacity increases by 10%-20% under the same power condition and compression force of rollers to material improve 800-1200kgf under the force of high-pressure spring.
3. High Pressure Suspension Mill meets the requirement of national dust-dump standard..
4. The separator can be adjusted very easily..
5. The curved surface shovel with split design, only the blade to be replaced during maintenance, thus the shovel has long service life.
6. The multi-class seals are adopted to keep the grinding equipment tightly closed.

YGM High-pressure Suspension Mill Working Principle :

When working, under the action of high-pressure spring and centrifugal force, the grinding roller rolls close to the grinding ring, and the shovel scoops up the material and sends it between the grinding rollers and the grinding ring, and the grinding rollers roll with the grinding ring to achieve the purpose of grinding and crushing. After the material is ground, the powder will be separated by the classifier with the circulating air of the blower. The coarse powder will fall back to the grinding chamber for regrinding, and the qualified powder with airflow will enter the cyclone powder collector and be collected, and finally be discharged through a duct as finished products.

Parameter:

Model	Maximum Feed size(mm)	Output size(mm)	Capacity(T)	Power of main frame(kw)
YGM65	< 15	0.613-0.033	0.4-1.8	15
YGM75	< 15	0.613-0.033	1-3	18.5
YGM85	< 20	0.613-0.033	1.2-4.6	22
YGM85B	< 20	0.613-0.033	1.2-4.6	22
YGM95	< 25	0.613-0.033	2.1-5.6	37
YGM130	< 30	0.95-0.033	3-9.5	75
YGM160	< 60	0.95-0.033	5-22	185