In recent years, the construction industry has been in the developing stage. Many transportation hub projects have been carried out. The demand for sand and gravel aggregates is increasing, and the price is constantly rising. In the construction of sand and gravel factories, the configuration of sand making machinery and equipment is very important. At present, there are many types on the market. What are the specific ones? What is the price? Next, I will introduce it to you in detail.
At present, there are about 8 types of sand making machinery in the sand and gravel plant on the market, among which the more commonly used equipment are vertical shaft impact sand making machine, compound hammer sand making machine, and double roller sand making machine, etc. with an hourly output of 3- 650 tons, according to the actual situation to choose reasonably.
Its output per hour is 40-650 tons, suitable for materials below 50mm. The four-port impeller design and the impact angle of the crushing chamber are improved, the throughput is increased, and the output is large. The material can be broken along the natural texture surface during the collision with the material. It achieves the characteristics of good grain shape of the finished product but low self-consumption. It is safe and reliable to use. The upper and lower sides of the peripheral guard plate can be turned around, and the combined throwing head only needs to replace the worn parts, reducing various costs. It has many years of application experience.
Its output is 5-100 tons per hour, suitable for materials with medium hardness below 100mm. The new fine crushing/coarse grinding product is developed by optimizing the main technical parameters, which realizes single operation, three-dimensional design, small footprint, and no screen. Bar setting, it is not easy to block when processing materials with large mud content, and the water content can reach 8%. The gap between the plates can be adjusted to meet various material conditions.
Its output is 5-110 tons per hour. It is suitable for medium and high hardness materials below 30 mm. Through the design of the rollers, the materials are crushed by two oppositely rotating rollers under strong pressure and become powdery and granular. The driving device is controlled by two A motor with more powerful kinetic energy can save 45% energy consumption under the same production capacity. At the same time, there is a wedge-shaped or gasket adjustment device between the two rollers. The wear cycle of the roller skin is long. The wearing parts are made of new high-strength wear-resistant materials and have a long service life.
From the above, we can see that there are many types of sand making machinery and equipment in sand and gravel plant, so the prices are different, roughly ranging from thousands to hundreds of thousands USD, and the choice of manufacturers is also very important. It's also different, so don't just look at the price, consider other factors.
Please write what you need,we will contact you asap !our email:[email protected]